Tercoo® Always Blasts Clean
Rotating blaster
For the right surface treatment, choose rotating discs from Tercoo®; an inexpensive and ideal alternative to blasting. Easily and quickly remove rust, paint, tar, epoxy, putty and glue residues from materials such as steel, iron, concrete or stone. Using the Tercoo® spacer and dust cap, polyester surfaces can also be cleaned. Consider, for example, the removal of gelcoat when osmosis occurs. What remains is a blasted surface with proper roughness and cleanliness, ready for the application of a new protective coating. In short; Tercoo® provides the right surface treatment for good adhesion.
Tercoo® Always Blasts Clean
Rotating blasters
For the right surface treatment, choose rotating discs from Tercoo®; an inexpensive and ideal alternative to blasting. Easily and quickly remove rust, paint, tar, epoxy, putty and glue residues from materials such as steel, iron, concrete or stone. Using the Tercoo® spacer and dust cap, polyester surfaces can also be cleaned. Consider, for example, the removal of gelcoat when osmosis occurs. What remains is a blasted surface with proper roughness and cleanliness, ready for the application of a new protective coating. In short; Tercoo® provides the right surface treatment for good adhesion.
Perfect surface treatment
Tercoo® Models
Tercoo® rotating blasters are available in four different variants. For a perfect surface finish, it is important to choose the right rotating disc for your project. The larger the surface area, the more rotating discs you need. In addition, it is important to choose the right Tercoo® blasting disc based on the specific attack and material to be treated to achieve the best results. The Tercoo® Single, Double and Triple blasting discs are attach to a drilling machine with a speed of at least 3000 and up to 4000 rpm. The Tercoo® Multi 8-Pack is powered by a specially adapted polisher (230V, 110V or pneumatic). Each Tercoo® blasting disk is carefully designed and manufactured to provide optimal performance and durability. Following the manufacturer’s instructions and taking proper safety precautions during use is essential for successful surface treatment.
Tercoo® Single
Suitable for small areas.
Tercoo® Double
Ideal for larger areas (10m²).
Tercoo® Triple
Suitable for large areas (30m²).
Tercoo® Multi
For semi- and professional use
Tercoo® Single
Tercoo® Double
Tercoo® Triple
Tercoo® Protective hood with suction nozzle
Tercoo® Adjustable Spacer
Tercoo® Protective hood with spacer
Tercoo® Air-powered (stift) polish machine
Tercoo® Multi 8-Pack
Fein machine for Tercoo® Multi 8-Pack
IR-Air-powered (angled) polisher for Tercoo® Multi 8-Pack
Tercoo® Extraction hood for Tercoo® Multi 8-pack
Rotating blasters
OUR PRODUCTS
for drilling machines
rotating blasters
Tercoo® Single
Rotating blaster for spot repair. For corners and small areas, such as moisture blisters under paint or small rust spots etc. on boats and cars or cleaning for welding work.
Tercoo® Double
Rotating blaster for larger areas, such as a boat keel, larger rust spots on boats and cleaning for welding.
Tercoo® Triple
Rotating blaster on a drill machine for large areas, such as an underwater ship or an entire deck. Examples: underwater ship, waterline, deck, cleaning for welding, etc.
Tercoo® Protective hood with suction nozzle
Suitable for Tercoo® single, double or triple. With vacuum cleaner connection 26.8mm (Festool). The protective hood is mounted on the shaft of the blaster. The components are polycarbonate, stainless steel and anodized aluminum.
Tercoo® Protective hood with adjustable spacer
Suitable for Tercoo® Single, Double and Triple. Combination of protective hood with adjustable spacer. Ideal combination for suction of contaminants and setting the correct depth. Achieves minimum pressure and significantly longer life of the Tercoo® rotating blaster.
Tercoo® Adjustable Spacer
Suitable for accurately removing gelcoat from polyester and determining proper depth. Also recommended on steel, so that minimal pressure is applied to the Tercoo® rotating blaster - significantly extending its life. Attaches to the neck of the drill machine. Parts are stainless steel, anodized aluminum, iron and plastic
Tercoo® Extraction hood Multi 8-pack.
Suitable for Tercoo® Multi 8-Pack in combination with a modified FEIN machine. Contaminants are easily extracted with this. With connection for extraction of contaminants. Hose connection is 55mm (Nederman). Parts are made of sheet steel.
Tercoo® Multi 8-pack.
Suitable for semi-professional and professional use in places where blasting is not allowed or impossible. The Multi 8-pack consists of 8 discs side by side on a hex shaft with M12 internal threads. The Tercoo® Multi-disks are individually replaceable. Fits the FEIN machine from our program, which is specially designed for Tercoo® Multi 8-pack discs.
high quality & primal strength
REDISCOVER BLASTING
HOW DOES IT WORK?
Tercoo® rotating disc is an SBR natural rubber disc fitted with 12 carbide pins. These are at an angle to the center, causing them to come out through the centrifugal force. Because the rubber disc is elastic, the carbide pins are retracted, creating a pendulum motion. That motion causes the carbide pins to hammer on the surface to be cleaned. This removes all contaminants and other applied protective coatings. No heat is generated by that hammering action, so tough materials such as tar, glue and sealant are also easily removed. This is in contrast to tools such as traditional grinding wheels or brushes, which work through friction. In short; no matter what the contamination, Tercoo® always cleans it!
high quality & primal strength
redefine sanding
HOW DOES IT WORK?
Tercoo® rotating disc is an SBR natural rubber disc fitted with 12 carbide pins. These are at an angle to the center, causing them to come out through the centrifugal force. Because the rubber disc is elastic, the carbide pins are retracted, creating a pendulum motion. That motion causes the carbide pins to hammer on the surface to be cleaned. This removes all contaminants and other applied protective coatings. No heat is generated by that hammering action, so tough materials such as tar, glue and sealant are also easily removed. This is in contrast to tools such as traditional grinding wheels or brushes, which work through friction. In short; no matter what the contamination, Tercoo® always cleans it!
Simplify your project
let's get the job done
Blasting with Tercoo
what they say about Tercoo
Blasting with Tercoo
what they say about Tercoo
Blasting with experts
MEET THE TEAM
Tercoo® Rotating discs
Tercoo® rotating discs are ideal for removing rust, rust spots, paint and tar. Even for removing flexible coatings and adhesive or sealant residues, which cannot be removed with a normal brush or grinding wheel, these rotating discs are ideal. Tercoo® rotating discs are an inexpensive and ideal alternative to blasting.
Tercoo® Rotating Blasters
Tercoo® rotating discs, also called rotating blasters, are ideally suited for removing rust, rust spots, paint and tar. Even for removing flexible coatings and adhesive or sealant residues, which cannot be removed with a normal brush or grinding wheel, these rotating discs are ideal. Tercoo® rotating discs are thus an inexpensive and ideal alternative to blasting.
We advise and help you achieve your goals.
- +31 (0) 541 - 760 530
- Jaartsveldstraat 1, Oldenzaal
- 07.30 - 16:30
We are happy to help you
Get in touch
© 2023 All Rights Reserved
We advise
and help you achieve your goals.
- +31 (0) 541 - 760 530
- Jaartsveldstraat 1, Oldenzaal
- 07.30 - 16:30
We are happy to help you
Get in touch
© 2023 All Rights Reserved